Browse all practice questions for the Operational Amplifier Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Operational Amplifier Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • The non-inverting input of an op-amp is designated by which symbol?
  • In an active notch filter, how do Q factor and notch depth relate, and which component adjustments influence Q?
  • For a positive input, the output of an inverting amplifier is
  • If an op-amp has a unity-gain bandwidth of 1 MHz and you design a closed-loop gain of 5, what is the approximate closed-loop bandwidth?
  • The -3 dB point is used to define the bandwidth boundary.
  • To generate a test signal lower in amplitude than can be supplied by your signal generator, use
  • What is the transfer function of a difference amplifier with resistors R1, R2, R3, R4 and the usual matching condition?
  • An inverting amplifier uses
  • The inverting input voltage is approximately 0 V, referred to as virtual ground.
  • In a negative-feedback op-amp circuit, the input differential voltage tends to
  • In the comparator circuit CR1, CR1 conducts as a zener and rectifier diode.
  • In a precision rectifier circuit, which statement best explains the role of the op-amp in achieving near-ideal rectification at small input voltages?
  • In the given threshold circuit, the threshold voltage Vth equals VsAT divided by (RH/R1).
  • For a TO-type metal can package, pin 1 is located adjacent to what feature?
  • Which statement best describes the impact of open-loop configuration on the output without feedback?
  • Full-power circuit performance refers to bandwidth.
  • Define common-mode input range and explain why it matters for single-supply operation.
  • In open-loop operation, op-amps exhibit what kind of sensitivity to input voltage variations?
  • Which statement about a voltage follower is false?
  • Based on the provided information, Vo is essentially what?
  • Which statement about summing amplifiers is true?
  • Explain the gain-bandwidth product concept and how it governs the closed-loop bandwidth for a given op-amp.
  • What is the effect of a capacitive load on op-amp stability and what practical measures help ensure stable operation?
  • What combination most determines the speed of recovery in a peak detector?
  • What primarily sets the gain of an inverting summing amplifier?
  • To achieve higher accuracy when converting a PWM signal to an analog voltage, which approach is recommended?
  • Which of the following is NOT a characteristic of an op-amp?
  • When would you choose a rail-to-rail input/output op-amp?
  • Which statement correctly describes the virtual ground concept at the inverting summing node?
  • What is the general function of a difference amplifier?
  • Outline a design approach for an op-amp-based active notch filter to reject a known interference frequency.
  • An inverting summing amplifier can be configured to
  • In a voltage follower, are external gain-setting resistors required?
  • In this circuit, R2 decreases the input impedance of the op-amp.
  • In a properly designed difference amplifier, common-mode signals are which of the following?
  • In a typical inverting op-amp configuration, increasing the feedback resistor value tends to
  • In this circuit, the output voltage Vo must be
  • If Vo equals V2 minus V1, which resistor condition ensures this relationship?
  • Define slew rate and describe its impact on waveform reproduction in high-speed op-amp circuits.
  • A properly balanced (trimmed) op amp with grounded inputs has an output voltage:
  • Which statement is false regarding the circuit gain factor?
  • What is the transfer function of an ideal op-amp integrator with input resistor Rin and feedback capacitor Cf, and how does a parallel feedback resistor modify it?
  • Compare a plain comparator with a Schmitt trigger in terms of noise immunity and switching behavior.
  • What condition ensures proper common-mode rejection in a classic four-resistor difference amplifier?
  • The two inputs of an op-amp are marked (-) and (+). These inputs provide what?
  • To configure this circuit for summation of the input voltages, change the value of the indicated (1 kΩ) resistor to which value?
  • Define input offset voltage, and explain how it affects the output in non-inverting and inverting configurations.
  • Unity gain in an inverting configuration requires
  • What resistor relationships are required in a differential amplifier circuit to achieve Vout = (R2/R1)(V2 − V1)?
  • In an op amp comparator circuit, hysteresis primarily does what to input sensitivity?
  • In a standard op-amp with negative feedback, the amplifier operates in its linear region when
  • Which configuration yields a differentiator, and what is the transfer function and a practical limitation?
  • What is the output expression for an inverting summing amplifier with multiple inputs V1, V2, … using input resistors R1, R2, … and a feedback resistor Rf?
  • Which statement about the difference amplifier is true when v2 is greater than v1?
  • In a Sallen-Key low-pass filter, what role does the feedback path play in setting Q and gain?
  • In a transimpedance amplifier, how does the output voltage relate to the input current and the feedback resistor?
  • In the inverting amplifier, the node where the input resistor connects to the op-amp's inverting input is held at what type of voltage due to negative feedback?
  • If the circuit load resistor is varied within design limits, the circuit voltage gain remains the same.
  • Which statement correctly describes how source impedance affects op-amp noise performance?
  • In a linear closed-loop op-amp, the differential input voltage is approximately what value?
  • When both inputs are equal, the op-amp is described as
  • Why is proper power-supply decoupling essential in op-amp circuits?
  • If the feedback resistor is doubled from its original value while the input resistor remains the same and the initial gain is 75, what is the new gain?
  • Which term describes the error voltage caused by input bias currents?
  • Which of the following op-amp statements is false?
  • In an inverting op-amp with a DC output offset, clipping can be asymmetric.
  • Explain the trade-off between closed-loop gain and bandwidth and how GBW constrains the relationship.
  • In circuit applications, the closed-loop gain is directly related to the op-amp what?
  • To adjust the output offset voltage of an op-amp, connect circuit inputs to
  • What is a practical consequence of poor CMRR in an instrumentation amplifier?
  • To set the output offset voltage to zero, connect the circuit inputs to the
  • In a non-inverting summing amplifier, which statement about the inverting input is true?
  • Which statement correctly distinguishes transimpedance amplifiers from transconductance amplifiers?
  • In an ideal inverting amplifier, the magnitude of the voltage gain is equal to the ratio of the feedback resistor to the input resistor.
  • Why is a leakage path added in practical differentiator or integrator circuits and how does it affect DC behavior?
  • In the example, Vo equals 2xV2 or 2xV1. Which option reflects this statement?
  • What is the closed-loop gain of a non-inverting amplifier and how does it relate to the feedback resistor network?
  • What is the closed-loop gain of a voltage follower?
  • For low frequencies, the AC gain of an inverting amplifier is determined by the ratio of which two resistors?
  • What is the closed-loop gain formula for an inverting amplifier, and what is the role of the virtual ground?
  • For the summing amplifier discussed, the circuit gain is set to which value?
  • In an inverting unity-gain amplifier, which statements are true when R3 = R1?
  • In designing an active notch filter, which statement best describes how the notch center frequency is determined?
  • A voltage follower circuit has which of the following characteristics?
  • What factors limit the speed of a peak detector using an op-amp, and how can you mitigate slow recovery?
  • Op-amps possess
  • On the inverting amplifier, the summing junction is at
  • A capacitor placed in parallel with the feedback resistor of an op-amp circuit causes the bandwidth to
  • Which of the following is NOT listed as an op amp package type?
  • In a quad op-amp chip, how many individual op-amps are present?
  • An op-amp configured as an open loop comparator does what?
  • What issues arise when driving a purely capacitive load with an op-amp and how can you mitigate them?
  • Based on the circuit information, the value of Rf is
  • When two equal signals are applied to the inputs of a balanced closed-loop op-amp circuit, the signal is what?
  • Slew rate refers to
  • The inverting input of this op amp is at virtual ground.
  • Describe how a peak detector using an op-amp and a diode operates.
  • The voltage divider circuit block provides which of the following voltages?
  • With Rf = 50 kΩ and Rin such that the gain magnitude is 10, Rin = 5 kΩ yields a gain of
  • Which are the key assumptions of the ideal op-amp model used in basic analysis?
  • In a three-op-amp instrumentation amplifier, derive the overall gain expression in terms of RG, R1, and the differential-stage resistors R3 and R4 (assuming ideal matching).
  • Typical voltage follower circuits are used as which of the following?
  • A common mode input voltage can represent which of the following in a circuit?
  • The simplest voltage follower configuration requires which connection?
  • For an inverting amplifier to reproduce input signals with a wide range of frequencies, the amplifier should possess
  • From the circuit values, Vo equals which of the following?
  • In a noninverting amplifier, the closed-loop gain is
  • Based on the non-inverting circuit, Vo equals which expression?
  • An inverting summing amplifier can perform which operation on multiple input signals?
  • The amplifier bandwidth of this circuit is less than 100 Hz.
  • If an input voltage of 0.2 V is applied to the circuit, the output voltage is
  • From the bottom view, the pin count direction is
  • Regarding the LF441 dual or quad style package, which statement is true?
  • If V1 and V2 are equal in value, Vo equals which expression?
  • What is a voltage follower and what advantages does it offer in signal conditioning?
  • When looking at an op amp from the bottom, the pin count orientation is:
  • What are limitations of precision rectifiers at very low input voltages, and how can they be mitigated?
  • The input of a noninverting op amp is applied to the
  • What happens when an op-amp output saturates and why is recovery time important in circuit design?
  • How is hysteresis implemented in a Schmitt trigger using positive feedback, and how do you compute the upper and lower thresholds in a common configuration?
  • If the input voltages of an op-amp are identical and the output voltage is 0Vdc. The op-amp is
  • In a voltage follower, the feedback path is from the output to which input?
  • As s1 is toggled back and forth, v0 switches between.
  • Which statement applies to a voltage follower circuit configuration?
  • Quad op-amp is a single package with how many individual op-amps?
  • The bandwidth of an inverting amplifier is measured at the
  • The -5.1 Vdc clamp in CR1 prevents the output from going below -5.1 Vdc. This is an example of which behavior?
  • What does the concept of a virtual short imply in an op-amp circuit with negative feedback?
  • If a difference amplifier has resistor mismatch from the ideal matching condition, what is the likely effect on the output?
  • In an open-loop configuration, op-amps are what?
  • Based on the circuit information, the correct currents are IL = 1 mA, IF = 1 mA, Iin = 1 mA.
  • If R1 is increased in an inverting amplifier, the circuit gain and bandwidth
  • A non-inverting summing amplifier cannot scale or weight input signals. Which of the following statements is false?
  • Which method is used to convert a PWM signal to an analog voltage using op-amps and passive components?
  • Which technique reduces the impact of temperature drift on op-amp parameters in precision applications?
  • In a Multiple-Feedback (MFB) active filter, what is the primary function of the feedback capacitors?
  • In a comparator configuration, the threshold voltage is determined by which quantity?
  • Compare LM741 and LM358 in terms of input common-mode range, output swing, supply requirements, and typical applications.
  • In an inverting amplifier, why is the virtual ground not a real ground?
  • To increase the circuit gain, you should decrease the value of Rin.
  • In an ideal op-amp, what is the input impedance?
  • Which statement is true?
  • If the gain of an inverting op amp is very high, the circuit
  • A typical differential amplifier circuit constructed with an op amp is subject to which limitations?
  • What issue do improved precision rectifier topologies aim to avoid?
  • If the circuit values are as specified, what is Vo?
  • When looking at an op amp from the top, the pin count orientation is:
  • What primarily limits the performance of a peak detector circuit that uses an op-amp and a diode?
  • The circuit output measures -2 V and Vin is 0.2 V; the magnitude of the closed-loop gain is
  • In a precision rectifier circuit, when Vin is negative, what happens to the diode and the output?
  • Which of the following actions will increase the circuit output voltage in an inverting amplifier?
  • What is CMRR and why is it important in instrumentation amplifiers?
  • Based on the circuit configuration, Vo equals which expression?
  • Which statement best describes the essential feedback path in a voltage follower?
  • Which statement about peak detectors at very fast input signals is most accurate?
  • For the LF441 in a dual or quad style package, null pins are:
  • In op-amp noise analysis, which statement is correct?
  • In an inverting summing amplifier, what happens to the polarity of the summed voltages?
  • In a transimpedance amplifier, Vout is proportional to the input current with a negative sign: Vout = -Iin × Rf.
  • An ideal op-amp in a voltage follower circuit has
  • Which statement about a gain-of-one amplifier is true?
  • In the ideal op-amp model, what is the relationship between the currents entering the two input terminals?
  • What is the output impedance of an ideal op-amp?
  • For a Multiple-Feedback (MFB) active filter, what do component values primarily determine?
  • Define noise gain and explain its role in op-amp stability and closed-loop design.
  • In a three-op-amp instrumentation amplifier, how does mismatching resistors R3 and R4 affect the output?
  • In a Sallen-Key low-pass filter, the op-amp typically acts as what?
  • Define power-supply rejection ratio (PSRR) and how it affects circuit performance.
  • Which of the following active notch topologies can realize a sharp notch with adjustable Q?
  • Which statement best describes capacitive loading's effect on op-amp stability?
  • In a circuit where Vo = 4 × (V2 - V1) and R3 = R4, what is the given value for both resistors in the example?
  • In an inverting amplifier, the closed-loop gain is given by the ratio of the feedback resistor to the input resistor with a negative sign. This is
  • Which of the following is NOT a packaging material used for op amp packages?
  • If V2 exceeds V1, what is the sign of the output Vout in a standard difference amplifier?
  • Explain the Wien bridge oscillator principle and the condition for sustained oscillation.
  • In a practical op-amp circuit, the closed-loop gain is mainly set by which components?
  • For a general-purpose practical op-amp, the open-loop voltage gain is about what?
  • If R1 through R4 are equal, Va equals the average of the input voltages.
  • The small current at the input of an op amp is described as
  • Which statement is false? an inverting summing amplifier does not alter the polarity of the summed voltages
  • The condition where the inverting and non-inverting inputs are equal due to negative feedback is known as what?
  • Explain the basic topology of a three-op-amp instrumentation amplifier and give the gain expression in terms of R1, Rg, and the differential stage resistors.
  • In a circuit with Rin = 5 kΩ and RF = 45 kΩ in an inverting amplifier, the closed-loop gain magnitude is
  • In a summing amplifier, increasing any one input while the others are constant will primarily affect the output through which mechanism?
  • If a positive voltage is applied to the input of a noninverting op amp, the output voltage is
  • What effect does adding a resistor in parallel with the feedback capacitor have on stability in a differentiator circuit?
  • Which term describes the error voltage associated with input bias currents?
  • Increasing the feedback resistor RF in a noninverting amplifier while Rin is fixed causes the gain to
  • Voltage comparators perform as
  • Which circuit illustrates a difference amplifier?
  • What limitation do conventional op-amps have compared with rail-to-rail types?
  • For the discussed inverting summing amplifier, the output voltage Vo is expressed as which of the following?
  • Which statement about the summing amplifier is true?
  • How do input bias currents and source resistances contribute to output offset in op-amp circuits, and how can this error be minimized?
  • The term describing equal voltages at the inputs due to feedback is?
  • Which statement about a difference amplifier is false?
  • In this circuit, if Vo equals (R4/R1) × (V2 − V1), which of the following must be true?
  • Which statement about op amp packaging materials is true?
  • Which parameter defines notch depth and sharpness in an active notch filter?
  • A typical property of a differential amplifier is that the output is proportional to the difference between which signals?
  • The small current at the input of an op amp is called
  • In an inverting amplifier, the closed-loop gain magnitude equals
  • Which is a typical reason to use an inverting summing amplifier?
  • How does a transimpedance amplifier convert current into voltage?
  • Which statement about a unity-gain buffer is accurate?
  • What practical modification is commonly made to an ideal differentiator circuit to improve stability, and what is its effect?
  • In a non-inverting summing amplifier, what is the differential input voltage in linear operation?
  • Which of the following is NOT listed as an op amp package type?
  • If the input voltage of an inverting amp is positive, which description best matches the output?
  • If Rin is halved while Rf remains fixed, the closed-loop gain magnitude doubles.
  • Explain how temperature drift affects op-amp parameters such as offset voltage and bias currents and what design strategies mitigate this drift.
  • An ideal voltage follower has
  • Offset current changes caused by drift produce which effect in the circuit's output?
  • In the comparator circuit, the output voltage Vo is what relationship to the input Vin?
  • The inverting unity-gain amplifier has a gain equal to which ratio, and what happens to the input signal?
  • Given a Schmitt trigger with Vout_high = +Vsat, Vout_low = -Vsat and a divider ratio α = R2/(R1+R2), what are the upper and lower switching thresholds?
  • Which statement best describes real-world op-amp non-ideal parameters and their impact on circuit performance?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy