Learn how to configure an operational amplifier so its output reflects the arithmetic mean of several input voltages. Removing series input resistance (RS) and the feedback gain resistor (RG) ensures equal input loading and unity gain, giving a true average rather than a scaled sum. This tweak matters for sensor arrays and precise signal summation.

Multiple Choice

If the circuit output must represent the average of the input voltages, which modification is recommended?

To get the output to be the average of all inputs, the signals must contribute equally and there should be no extra gain that would scale the sum. Any series resistance in front of the inputs (RS) will cause different inputs to load differently if their sources aren’t identical, biasing the average. Likewise, a feedback path that imposes gain (RG) will scale the summed inputs rather than outputting their true mean. Shorting RG removes the gain from the feedback path, effectively making the stage a unity-gain follower of the averaged node. Removing RS eliminates those extra drops on each input, so every input contributes with the same weight. Together, this configuration yields an output that represents the arithmetic average of the input voltages. If you keep RS or add RG, you’ll introduce unequal loading or additional gain, which distorts the true average.

When you’re dealing with an op-amp network that sums multiple voltages, the goal isn’t just to add them up—it’s to do so in a fair, predictable way. Think of it like a choir where every voice should contribute equally to the final harmony. If some singers wear heavy boots, others sing softly, and a conductor’s baton isn’t guiding harmony, you’ll get a muddied result. In circuits, those “boots” and that imperfect baton show up as source impedance and feedback gain. The trick is to set things up so every input leaves the same footprint on the output, producing the true arithmetic mean rather than a skewed sum.

Let’s anchor this with a practical picture. You’ve got several voltage sources feeding into a node, each through its own path. In an ideal world, each source would influence the node equally, and the op-amp would copy that averaged value to the output, without bias or extra amplification. Reality, though, loves a detour. Small resistances in series with inputs (call them RS) and any feedback path that adds gain (we’ll label that RG) can tilt the playing field. One source might dominate; another might lag. The final output swells or shrinks, not because the inputs are different, but because the circuitry is weighting them differently.

The core idea is simple: to get the average, you want each input to contribute with equal weight and you don’t want the feedback network to scale the result beyond that average. That’s where two clean design moves come into play: remove the source resistance in front of the inputs and eliminate any gain path in the feedback loop that would multiply the summed signal. In practical terms, short the series resistors that sit in front of inputs (RS) and remove the resistor in the feedback path that would otherwise introduce gain (RG). When you do that, the circuit behaves like a unity-gain follower of the averaged node.

Let me explain why these changes matter, with a little intuition you can carry into real projects.

Why RS matters

Imagine each input source as a tiny water faucet feeding into a common pipe. If some faucets have narrower spigots (RS nonzero) compared to others, or if they sit behind small resistances, they don’t push water into the pipe with the same vigor. The pressure at the node—the aggregated voltage—ends up closer to the stronger sources and farther from the weaker ones. In electrical terms, the input sources load each other differently when there’s series resistance. The “average” you get isn’t the simple arithmetic mean anymore; it’s biased toward those inputs that can push more current through their RS path.

When you eliminate RS, you’re removing the extra drops in front of each input. The sources then contribute more uniformly because each input sees effectively the same interface into the summing junction. It’s like opening all the taps to the same size hole—the water level in the common pipe rises to reflect a fair blend of all sources.

Why RG matters

Feedback is the heartbeat of most op-amp configurations. It stabilizes gain, sets bandwidth, and shapes linearity. But it’s a double-edged sword: a feedback path that enforces gain will multiply the signals that are being summed. If your goal is to report the plain average, any extra gain in the feedback loop will scale that average up, distorting the pure mean you intend to capture.

By shorting RG, you’re removing the gain path in the feedback. The op-amp ends up acting as a buffer that mirrors the averaged node—like a faithful copycat, but with the benefits of high input impedance and low output impedance. The result is a direct, undistorted representation of the mean of your inputs.

Putting it together: the practical recipe

  • Short RG: In other words, disable the gain-setting feedback component so the loop isn’t boosting or attenuating the summed signal.

  • Remove RS: take out the series resistances in front of each input so all sources have the same loading and contribution.

With those two tweaks, the circuit becomes a straightforward mean sampler. If you wire up N input voltages, the output will track their arithmetic average, assuming the sources are referenced to a common ground and share a compatible impedance profile. The beauty is in the simplicity: fewer artifacts, fewer surprises, a result that truly reflects the intended blend.

A few subtleties worth noting

  • Source impedance and drive strength still matter. In a real world, sources aren’t perfect voltage rails; their output impedance, noise, and coupling can influence the averaged node. Matching source impedances as closely as possible helps keep the average honest.

  • The op-amp’s own input bias currents aren’t free riders either. They can introduce tiny errors, especially if the inputs sit at different DC levels or if the sources have different impedance histories. Some designers add a small compensation resistor or bias network to balance these currents, but that’s a topic for another time.

  • Bandwidth and stability aren’t free. Even in a unity-gain configuration, the latency and phase characteristics of the op-amp matter. If you’re summing many inputs, you may want to check the effective input capacitance and how it interacts with the op-amp’s input stage. A modest care with layout—short, direct routes to the summing node, shielding sensitive traces—goes a long way.

  • Practical caveats: real-world sources might not be perfectly low-impedance. If you must work with high-impedance sources, you might reintroduce a small buffer stage per input to isolate them, but that adds complexity and a potential deviation from a strict average unless you design carefully.

A friendly aside on “mean” in electronics

This concept shows up all the time beyond summing networks. In sensor arrays—think temperature sensors, light sensors, or pressure sensors—the idea of averaging can help produce a stable, representative signal when each sensor has slightly different characteristics or ambient conditions. In audio, a mixer with unity gain for each channel uses similar thinking to avoid clobbering tracks with uneven loading. The underlying principle is the same: when you want an unskewed average, you minimize asymmetries in loading and gain.

Thinking in real designs

If you’re tinkering in a lab or simulating circuits, a quick mental check helps. Before you power up and observe the output, ask:

  • Do all inputs connect to the summing node with approximately the same impedance?

  • Is there any feedback network that could be multiplying the sum?

  • Are there extra series resistances that would differentially load sources?

If the answer to those questions points to disparity, you’ve got your tweak guide in hand. Remove the impedance at the sources (as much as practical) and tone down or remove the gain in the feedback path. The result tends to be a cleaner average.

A few cautions, just to stay honest

  • If you absolutely cannot remove RS due to other circuit constraints, expect a weighted average rather than a perfect mean. In such cases, calculating the effective weights and compensating in the design can salvage accuracy, but it needs careful analysis.

  • If you must retain RG for other functional reasons (like a broader system requires some level of gain somewhere), you can still achieve a close approximation of the average by selecting RG values that minimize their influence on the summed node or by using a different topology for the averaging function.

  • When you scale up to a large number of inputs, common pitfalls reappear. Parasitics creep in, wire resistances matter more, and layout quality becomes a star player. Layout isn’t glamorous, but it’s essential for reliable averaging in practice.

A closing thought: the elegance of simplicity

The elegance of this approach lies in its economy. Remove the extra barging in of resistance and the weighty push of gain, and the circuit speaks in a clear, uncolored voice—the arithmetic mean of the inputs. It’s a reminder that sometimes the best path forward isn’t adding more features or bells and whistles, but stripping away what skews the signal you care about.

If you’re curious to see how this plays out on a breadboard or in a simulation, try a quick setup with three or four DC sources, each with a different voltage. Build the summing node with and without RS and RG, and compare the outputs. The difference will be tangible: the version with RS shorted and RG removed tracks a smoother average, while the more loaded or gainer variant tends to tilt toward certain inputs. It’s a tactile lesson in how small design choices ripple into the final signal.

In the end, a well-balanced mean is more than numbers on a screen. It’s a testament to thoughtful wiring, clean paths, and the quiet discipline of keeping the inputs honest. And when you lean into that discipline, you’ll find that averaging signals becomes not a mystery, but a dependable tool in your electronics toolkit.